CVE-2026-76489

For information about which products were affected by these vulnerabilities at the time of publication, see the following sections.

Open Source Snort 3

At the time of publication, these vulnerabilities affected Open Source Snort 3 if it was configured to parse Netflow Protocol connections.

For information about which Snort releases were vulnerable at the time of publication, see the Fixed Software section of this advisory. For more information on Snort, see the Snort website.

Cisco Secure Firewall Threat Defense Software

At the time of publication, these vulnerabilities affected Cisco Secure Firewall Threat Defense (FTD) Software if Snort 3 was configured to parse Netflow Protocol connections.

For information about which Cisco Secure FTD Software releases are vulnerable, see the Fixed Software section of this advisory.

Determine the Snort Configuration on Cisco Secure FTD Software

On new installations of Cisco Secure FTD Software releases 7.0.0 and later, Snort 3 is running by default. On devices that were running Cisco Secure FTD Software Release 6.7.0 or earlier and were upgraded to Release 7.0.0 or later, Snort 2 is running by default.

Snort 2 was deprecated in Cisco Secure FTD Software releases 7.7.0 and later.

To determine if Snort 3 is running on Cisco Secure FTD Software, see Determine the Active Snort Version that Runs on Firepower Threat Defense (FTD). Snort 3 must be active for these vulnerabilities to be exploited.

Unified Threat Defense on Cisco IOS XE Software

At the time of publication, these vulnerabilities affected the following Cisco products if they were running a vulnerable release of Unified Threat Defense (UTD) Snort IPS Engine for Cisco IOS XE Software or UTD Engine for Cisco IOS XE SD-WAN Software:

• 1000 Series Integrated Services Routers (ISRs)

• 4000 Series ISRs

• 8100 Series Secure Routers

• 8200 Series Secure Routers

• 8300 Series Secure Routers

• 8400 Series Secure Routers

• Catalyst 8000V Edge Software

• Catalyst 8200 Series Edge Platforms

• Catalyst 8300 Series Edge Platforms

• Catalyst 8500L Edge Platforms

• Catalyst IR1800 Rugged Series Routers

• Catalyst IR8340 Rugged Routers

• Cloud Services Routers 1000V

• Integrated Services Virtual Routers

Note: UTD is not installed on these devices by default. If the UTD file is not installed, the device is not affected by these vulnerabilities.

For information about which Cisco IOS XE Software releases were vulnerable at the time of publication, see the Fixed Software section of this advisory.

Determine Whether UTD Is Enabled

To determine whether UTD is enabled on a device, use the show utd engine standard status command. If the output shows a Yes under Running, UTD is enabled. If there is no output, the device is not affected. The following example shows the output on a device that has UTD enabled:

Router# show utd engine standard status 
Engine version       : 1.0.19_SV2.9.16.1_XE17.3
Profile              : Cloud-Low
System memory        :
             Usage  : 6.00 %
             Status : Green
Number of engines    : 1

Engine        Running    Health     Reason    
===========================================
Engine(#1):   Yes        Green      None
=======================================================
.
.
.

Cisco Meraki MX Security Appliances

At the time of publication, these vulnerabilities affected the following products if they were running a vulnerable release of Cisco Meraki software:

For details about automatic upgrades of devices that are connected to the Cisco Meraki Dashboard, see the Fixed Software section of this advisory.

There are no workarounds that address these vulnerabilities.

Cisco considers any workarounds and mitigations (if applicable) to be temporary solutions until an upgrade to a fixed software release is available. To remediate these vulnerabilities and avoid future exposure as described in this advisory, Cisco strongly recommends that customers upgrade to the fixed software indicated in this advisory.

Fixed Releases

The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.

For information about fixed releases, see the following sections.

Open Source Snort 3

At the time of publication, the release information in the following table was accurate.

The left column lists Snort software releases, and the right column indicates whether a release was affected by the vulnerabilities that are described in this advisory and which release included the fix for these vulnerabilities.

Note: This fix is also included as part of the broader hardening improvements that are disclosed in the security advisory Multiple Cisco Products Snort 3 Security Hardening Release: October 2026.

Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software

To help customers determine their exposure to vulnerabilities in Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software, Cisco provides the Cisco Software Checker. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”).

If applicable, the tool also returns the earliest release that fixes all the vulnerabilities that are described in all the advisories that the Software Checker identifies (“Combined First Fixed”).

To use the tool, go to the Cisco Software Checker page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:

1. Choose which advisories the tool will search-all advisories, only advisories with a Critical or High Security Impact Rating (SIR), or only this advisory.

2. Choose the appropriate software.

3. Choose the appropriate platform.

4. Enter a release number-for example, 9.20.3.4 for Cisco Secure Firewall ASA Software or 7.4.2 for Cisco Secure FTD Software.

5. Click Check.

For instructions on upgrading a Cisco Secure FTD device, see the appropriate Cisco Secure FMC upgrade guide.

Additional Resources

For help determining the best Cisco Secure FTD Software release, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.

Cisco Secure Firewall Threat Defense Compatibility Guide

UTD on Cisco IOS XE Software

At the time of publication, the release information in the following table was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.

In the following table, the left column lists Cisco IOS XE Software releases, and the right column indicates whether a release was affected by the vulnerabilities that are described in this advisory and which release included the fix for these vulnerabilities.

Cisco Meraki MX Security Appliances

Snort is integrated natively into Cisco Meraki security appliances as part of the threat protection services that are managed automatically through the Cisco Meraki Dashboard. No customer action is required to download Cisco Meraki firmware or the Snort 3 package for Cisco Meraki devices.

As of October 21, 2026, all Cisco Meraki models that are listed in this advisory that are online and connected to the Cisco Meraki Dashboard have been automatically updated with the Snort 3 package.

The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.