Cisco Security Advisories guidance
Vendor revision: Oct 7, 2026To remediate the vulnerabilities that were disclosed on October 7, 2026, Cisco strongly recommends that customers upgrade to the fixed software that is indicated in the advisories.
Vulnerability intelligence
CVE-2026-76465 and is rated Critical severity with a CVSS score of 9.8. It is not in the current CISA KEV record we collected. That does not prove exploitation has not occurred.
To remediate the vulnerabilities that were disclosed on October 7, 2026, Cisco strongly recommends that customers upgrade to the fixed software that is indicated in the advisories.
Cisco has released software updates that address this vulnerability.
A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software for Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper validation when an affected device is processing an MPLS echo-request packet. An attacker could exploit this vulnerability by sending a crafted MPLS echo-request to an IP address on an affected device.
A successful exploit could allow the attacker to execute arbitrary code with root privileges and could cause process crashes, which could result in a device reload and a DoS condition.
Source: NVD
Cisco Security Advisories · Updated Oct 7, 2026
This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco NX-OS Software and have the MPLS OAM feature enabled:
Nexus 3000 Series Switches
Nexus 9000 Series Switches in standalone NX-OS mode
Note: Cisco Nexus 9000 Series Switches with a Silicon One ASIC do not support the MPLS OAM feature (cannot be enabled) and therefore are not affected by this vulnerability.
The MPLS OAM feature is disabled by default on Cisco Nexus 3000 and 9000 Series Switches.
For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.
Determine the Status of MPLS OAM
To determine whether a Cisco Nexus 3000 or 9000 Series Switch is configured with the MPLS OAM feature enabled, use the show feature | include mpls_oam command at the Cisco NX-OS CLI. The following example shows the output of a switch that has the MPLS OAM feature enabled:
switch# show feature | include mpls_oam mpls_oam 1 enabled
There are no workarounds that address this vulnerability.
If the MPLS OAM feature is not required, disabling it removes the attack vector and is a mitigation for this vulnerability. To disable the MPLS OAM feature, use the Cisco NX-OS CLI command no feature mpls oam in global configuration mode on a Cisco Nexus 3000 or 9000 Series Switch.
While this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations.
Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Live Protect Shield
Cisco has released a Live Protect shield for CVE-2026-76465 to temporarily mitigate this vulnerability for Cisco NX-OS Software.
For information about Live Protect for Cisco NX-OS Software, see Cisco Nexus 9000 Series NX-OS Security Configuration Guide.
Note: Live Protect shields are temporary mitigations to bridge the gap until software updates can be scheduled. To remediate this vulnerability, upgrade to a fixed software release as noted in the Fixed Software section of this advisory.
Cisco considers any workarounds and mitigations (if applicable) to be temporary solutions until an upgrade to a fixed software release is available. To remediate this vulnerability and avoid future exposure as described in this advisory, Cisco strongly recommends that customers upgrade to the fixed software indicated in this advisory.
To help customers determine their exposure to vulnerabilities in Cisco NX-OS Software, Cisco provides the Cisco Software Checker. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”).
If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories that the Software Checker identifies (“Combined First Fixed”).
To use the tool, go to the Cisco Software Checker page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:
Choose which advisories the tool will search-only this advisory, only advisories with a Critical or High Security Impact Rating (SIR), or all advisories.
Choose the appropriate software.
Choose the appropriate platform.
Enter a release number-for example, 10.4(4) for Cisco Nexus 3000 Series Switches or 16.0(8e) for Cisco NX-OS Software in ACI mode.
Click Check.
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.